**•How To Make Skyrim Run Better On PS3!•**
Tired of the game-breaking lag with your 20meg Skyrim save files? Here is a guide to help prevent these issues:
1) "Deleting Excess Save Files"
•Go to "Save Data Utility" on the XMB & check how many Skyrim saves あなた have. If あなた have もっと見る then three, 削除 them. あなた must only have three saves maximum. Also make sure to 削除 any "Auto-Saves."
2) "Freeing Up HDD Space"
•Check how many GBs あなた have left on your console. Go to "Settings," "System Setting" & then open "System Information." It will 表示する あなた how many GBs あなた have used and how much 宇宙 あなた have left. e.g: 233/320GB. The number on the left will 表示する how many GBs あなた have left. If あなた don't have much, scroll across the XMB to "Game Data Utility" and 削除 any game's data that あなた aren't playing anymore/lately. Don't worry, Game data is only "install data," when あなた decide to play the game again あなた will just have to install again and your saves will not be affected. If あなた also want to copy & 削除 game saves, scroll down from "Game Data Utility" and select "Save Data Utility." If あなた have important saves, don't worry about them. Saves take up hardly any 宇宙 compared to "Game Data." If あなた want to free-up as much 宇宙 as possible, あなた can plug a USB into the PS3 and copy "non-copy-protected" saves to your thumb drive. That way あなた can 削除 them off of あなた system and just copy them back from the USB when あなた want to play them again. #NOTE# あなた can copy some "Game Data Utility" as well as "Save Data Utility" if あなた want to do both. Make sure あなた have as much 宇宙 as possible because Skyrim needs quite a bit of HDD 宇宙 to run properly. My Skyrim Game Data is about 4-5 GBs.
2) Tweaking "Game & Display Settings"
•Sometimes "Graphical Enhancement" settings can interfere with gameplay performance such as frame-rate dips, glitches & lag in massive games like Skyrim. (Don't worry, あなた will be changing these settings back later!)
#Temporarily Disable The Following:
*Go to "Game Settings" and turn "PS Smoothing" to "Off."
*Scroll down to "Display Settings" and disable/limit all the HDMI Features:
- Super White
- RGB Range to "Limited."
- Cross-Colour Reduction Filter
- Deep Colour Output
3) "Permanently Disabling All In-Game Auto Saves & Testing Performance"
•After you've put all of the ^ *above settings to either "off" または "limited," insert your Skyrim disc and load it up.
Once the game has loaded, go to setting and disable all Auto-Saves listed below (if あなた haven't already.)
*Save on Wait
*Save on Fast Travel
*Save on Rest
*Save on Character Menu
^ *This will prevent in-game stuttering when your system forces your game to save automatically. It may also decrease 読み込み中 times significantly as well as preventing auto-save files from filling up your load & save menus.
4) "System Restart & Re-Enabling Settings"
•When you've disabled all of the "Auto-Save" options, exit the menu and test how your game is running. Is it good, OK, annoying または terribly unplayable? Most likely it'll either be worse または a even a tiny bit better than it was before あなた changed the settings. If it's at least a little better, it'll probably still be, well...BAD!
Don't worry! A system restart and another change of settings should fix that right up!
*Quit the game and turn the PS3 off then on again.
*When the PS3 has turned on again, go to back to "Game" and "Display Settings" to re-enable the settings あなた disabled.
#NOTE# After this あなた can restart the system again if あなた want to. あなた do not have to.
With your re-enabled "Graphic Settings," load up Skyrim again and enjoy the (at least temporary) smoother, consistent frame-rate & a lot less lag! ;) *^_^*
This 記事 is by:
~*•Žÿłįçę*•~
Tired of the game-breaking lag with your 20meg Skyrim save files? Here is a guide to help prevent these issues:
1) "Deleting Excess Save Files"
•Go to "Save Data Utility" on the XMB & check how many Skyrim saves あなた have. If あなた have もっと見る then three, 削除 them. あなた must only have three saves maximum. Also make sure to 削除 any "Auto-Saves."
2) "Freeing Up HDD Space"
•Check how many GBs あなた have left on your console. Go to "Settings," "System Setting" & then open "System Information." It will 表示する あなた how many GBs あなた have used and how much 宇宙 あなた have left. e.g: 233/320GB. The number on the left will 表示する how many GBs あなた have left. If あなた don't have much, scroll across the XMB to "Game Data Utility" and 削除 any game's data that あなた aren't playing anymore/lately. Don't worry, Game data is only "install data," when あなた decide to play the game again あなた will just have to install again and your saves will not be affected. If あなた also want to copy & 削除 game saves, scroll down from "Game Data Utility" and select "Save Data Utility." If あなた have important saves, don't worry about them. Saves take up hardly any 宇宙 compared to "Game Data." If あなた want to free-up as much 宇宙 as possible, あなた can plug a USB into the PS3 and copy "non-copy-protected" saves to your thumb drive. That way あなた can 削除 them off of あなた system and just copy them back from the USB when あなた want to play them again. #NOTE# あなた can copy some "Game Data Utility" as well as "Save Data Utility" if あなた want to do both. Make sure あなた have as much 宇宙 as possible because Skyrim needs quite a bit of HDD 宇宙 to run properly. My Skyrim Game Data is about 4-5 GBs.
2) Tweaking "Game & Display Settings"
•Sometimes "Graphical Enhancement" settings can interfere with gameplay performance such as frame-rate dips, glitches & lag in massive games like Skyrim. (Don't worry, あなた will be changing these settings back later!)
#Temporarily Disable The Following:
*Go to "Game Settings" and turn "PS Smoothing" to "Off."
*Scroll down to "Display Settings" and disable/limit all the HDMI Features:
- Super White
- RGB Range to "Limited."
- Cross-Colour Reduction Filter
- Deep Colour Output
3) "Permanently Disabling All In-Game Auto Saves & Testing Performance"
•After you've put all of the ^ *above settings to either "off" または "limited," insert your Skyrim disc and load it up.
Once the game has loaded, go to setting and disable all Auto-Saves listed below (if あなた haven't already.)
*Save on Wait
*Save on Fast Travel
*Save on Rest
*Save on Character Menu
^ *This will prevent in-game stuttering when your system forces your game to save automatically. It may also decrease 読み込み中 times significantly as well as preventing auto-save files from filling up your load & save menus.
4) "System Restart & Re-Enabling Settings"
•When you've disabled all of the "Auto-Save" options, exit the menu and test how your game is running. Is it good, OK, annoying または terribly unplayable? Most likely it'll either be worse または a even a tiny bit better than it was before あなた changed the settings. If it's at least a little better, it'll probably still be, well...BAD!
Don't worry! A system restart and another change of settings should fix that right up!
*Quit the game and turn the PS3 off then on again.
*When the PS3 has turned on again, go to back to "Game" and "Display Settings" to re-enable the settings あなた disabled.
#NOTE# After this あなた can restart the system again if あなた want to. あなた do not have to.
With your re-enabled "Graphic Settings," load up Skyrim again and enjoy the (at least temporary) smoother, consistent frame-rate & a lot less lag! ;) *^_^*
This 記事 is by:
~*•Žÿłįçę*•~
